QKits Electronic Kits: K2543, Electronic Ignition Amplifier kit

Features

	Easy to fit, only four wires
	Transistor assisted ignition method
	Significantly reduces contact breaker wear
	Original connections can be easily restored at any time
	Improved coil performance returns easier starting and cleaner combustion

Applications

	For any petrol burning motor vehicle
	Suitable for engines of 2 to 8 cylinders

Electronic Ignition Amplifier Kit Velleman Kit K2543

This kit is an electronic switch, it carries the load for the coil through a power transistor.

The K2543 kit uses the points to obtain the proper firing time.

There are two main types of electronic ignition currently available

The first being that which completely replaces the 'electro-mechanical' ignition (contact breaker points, condenser, etc.) and the type that can be fitted as an 'upgrade', producing what is commonly called 'transistor assisted ignition'.

The latter type still makes use of the 'conventional' mechanical timing switch (the contact breaker points).

However, it does provide a faster switching speed and more energy to the spark, so places less wear on the points because the arcing factor is removed, keeping the engine in tune for longer periods.

Fixing this electronic ignition system will lead to improved starting and smoother running, particularly at very high and very low rpm.

Other benefits include lower fuel consumption, less pollution and lower servicing costs.

Specifications:

	Switching speed: 1ms
	Firing interval: 2ms minimum
	Coil switching current: 4A nominal
	Supply voltage: 12V to 14V DC
	Polarity: Negative earth only
	Supply current drain: 320mA approx.

Connection 1 goes to +12 volts DC from the ignition key. Connection 2 goes to the points (disconnect the condenser). Connection 3 to the coil where the points were connected. Connection 4 to ground or negative or Earth.

	~ Celebrating 16 Years of QualityKits in 2012 ~		03-Feb-2012